ATP Electronics Piper Archer - Flap Setting for Landing; Traffic Pattern Operations

Arrival Procedures • 25
Flap Setting
ATP students are trained to land using the Standardized Flaps 25° Landing
prole. When conditions are necessary for a Soft-Field or Short-Field landing,
those proles should be used.
Trac Pattern Operations
Pattern Briengs should include:
• Flap Setting
• Type of Approach & Landing (Short-Field, Soft-Field, etc.)
• Final Approach Speed
• Aiming Point
• Touchdown Point
Trac Pattern Operations Prole
At TPA
• Reduce Power –
Maintain 90 KIAS
Established on Downwind
• Pattern Brieng
300' Below TPA
• Turn Crosswind
Abeam Touchdown Point
• "Before Landing Checklist"
• Select Flaps 25°
90°
45°
V
X
/ V
Y
Climb