3 / 22
Introduction
This user manual contains basic installation, factory settings, operation, maintenance instructions
and other descriptions of A230E fiber laser cutting head. Since mechanical parts are too many, this
manual will only introduce the main units.
A230E electric fiber laser cutting head was designed for flat cutting within 3000W by German
brand A-cutter in 2022. With motor driver unit inside, the position of focus lens unit in z axis can be
adjust automatically in the range of 24mm, so user can set “continues focus adjustment” in the cutting
software to accelerate the thick metal plate cutting speed and cut different metal plat with different
thickness and kind. With optical lens group in D30 and multi-interfaces design, A230E fiber laser
cutting head can be matched with different types of fiber laser sources. It’s much more stable during
longtime working in high laser power with its optimized optical system and water cooling system.
Product highlights
⚫ A230E electric fiber laser cutting head has been integrated with the controlling unit for
adjusting the focus lens unit’s position in z axis. By interacting and controlling marshalling
with laser cutting controlling system, it largely reduced the system’s complexity and the
difficulty of installation and debugging.
⚫ Adapting with light alloy materials and compact structure design, A230E electric fiber laser
cutting head has only 68mm in length and 3.5KG in weight, which has largely reduced the
load-bearing demands on the transom of the laser cutting machine so it can be used more
widespread.
⚫ By working with SC series fiber laser cutting system, A230E can realize high speed drilling
and auto adjust different types of cutting parameters that have been set in the cutting software
in advance. Cutting software can monitor the focus position in real time. It also supports
manual adjustment to achieve the perfect cutting performance.
Structure
From figure 1, we can see that A230E fiber laser cutting head contains six basic units: QBH
interface, collimate unit, focus unit, protection unit, nozzle tips unit and motor driver unit.
To Next Page