Configuration screen
After the correct password has been entered, the configuration screen of the user
interface will be loaded as shown below.
Configuration screen for APC100
This window gives an overview of the configuration settings which can be adjusted
in the APC100 web interface. Different icons are shown for ‘Network settings’,
‘Password settings’, ‘Time settings’, ‘APC100 address’ and ‘Factory settings’
Click the particular button if you want to make any changes to the corresponding
settngs.
Connection status
At the top left position besides the ‘AUDAC’ logo is the connection status displayed. To
have communication with the device, the connection status must show ‘ONLINE’.
To Next Page
Loading...