Time Settings
In this window the time settings for the APC100 can be changed.
Time settings screen for APC100
The current time and date for the APC100 can be set in this window. The APC100
act as a real-time-clock for synchronizing timer scheduled events on other devices
connected in your network. (not including their own real-time-clock)
The time and date settings can be entered manually by selecting the right values
from the dropdown list. After the correct values are selected, the ‘Set Clock’ button
should be clicked and the entered time & date will be saved. The internal real-time
clock which is holding the current time and date has an accuracy of 1 minute / month,
meaning the set value may expire with a maximum of 1 minute / month.
A second option is synchronising the internal clock constantly with a public time
server. This function can be activated by clicking the ‘Enabled’ button under the ‘Time
server settings’ header. Subsequently, the time zone in which the device is located
should be selected. In case the time server function has been selected, the M2 will try
to synchronise every few minutes with a public time server (through internet), making
sure the current set time is always accurate and won’t expire.
To Next Page
Loading...
Need help?
General