The “IP ranges” of home and office networks are defined by the network
administrator, this means that the IP range of your home or office network can
be different from another network. AUDAC products have the following default IP
address: “192.168.0.xxx”, this means the standard IP range of AUDAC products is
“192.168.000.xxx”. If your network is using a different IP range, the AUDAC products
will not be accessible from your network. You can change the IP address of the
AUDAC products to make them work properly in your network. This can be done in
the settings menu, and is described extensively in the “Settings” chapter of this user
manual.
Of course, to make changes to the settings menu of the AUDAC products, you need
to have access to the user interface on the product’s webpage. This can be done by
temporarily giving your computer an IP address within the IP range of the AUDAC
product, for example “192.168.0.193”. After the IP address of your computer is within
the IP range of the product, the user interface is accessible and the IP address of the
product can be changed to an IP address within the IP range of your network. If the
IP address of the product is within the IP range of your network, you can change the
IP address of your computer to it’s former IP address and the product should work
properly in your home or office network.
Ask your network administrator for help if you are not familiar with networks.
Summary
- All devices must have a unique IP address
- All devices must be within the same IP range
To Next Page
Loading...
Need help?
General