Windshield/headlight
washer container
Fig. 207 Engine compartmen t : cover on the windshield
washer fl uid reservoir
The washer flu id container is marked with the
symbol ~ on its cap c> fig. 207, c> page 233 .
.. Before you check anyth ing in the engine
compartment ,
always read and heed all
WARNINGS c> A in Working in the engine
compartment on page 231 .
.. Lift the filler cap tongue to add washer flu-
id. You can fill the container to the top .
.. Press the cap back onto the filler neck after
filling the containe r.
You can find the reservoir
capacity in the tab le
in
c> page 290 .
Clean water should be used when fill ing up. If
possible, use soft water to prevent scaling on
washer jets . Always add a glass cleaner solu-
tion (with frost protection in the winter).
(D Note
Do not mix engine coolant antifreeze or
any other additives to fill up the wind-
shield washer reservoir.
Checking and filling 247
To Next Page
Loading...
