66 Seats and storage
Seat memory
Description
App lies to vehicles: wit h memory fu nctio n
The memory function allows you to quickly
and eas ily store and recall personal seating
profiles for the dr iver, front passenger and
outer rear seats*. The memory function is op-
erated through the master key and the memo-
ry buttons in the driver's/front passenger's
doors and the rear doors*.
The driver's seating profi le is stored and as -
signed to the master key each time the vehicle
is locked . The seating profile is recalled auto-
matically when the vehicle is unlocked. If two
Remote control
master key
Driver
Seat X
Head restraint X
Steering wheel* X
Safety belt* X
Both exterior rear-
X
view mirrors*
There are two additional buttons in the rea r
doors* that can be used to recall two stored
seating profiles
r:=;,page 67.
Remote control key
Appl ies to vehicles: with memory function
To assign the driver's seat settings to the re-
mote contro l key when locking the vehicle, the
function must be switched on .
.. Select :
I CAR I function button > Car systems
control button > Vehicle settings > Seats >
Driver seat > Remote control key > On.
@ Tips
If you do not want another driver's set-
tings to be assigned to the remote control
key, switch off the memory function using
the MMI or the
!OFF! button r:=;, page 67.
people use one vehicle, it is recommended
that each person always uses "their own"
master key.
Two seating profiles can be stored in each of
the driver's/front passenger's doors and one
seat ing profile in each of the rear doors*.
Once stored, th ese seat ing profiles can be re-
called at any time.
The following sett ings are stored:
Memory button
Driver Front passenger
Outer rear seats*
X X X
X
X
X
X
X
X
To Next Page
Loading...
