Pass-through with ski
sack
Preparing the pass-through
Applies to vehicles: with pass-through and ski sack
Long objects such as skis can be transported
in the ski sack .
Fig. 70 Rear bench seat: remov ing the protect ive cover
Fig. 71 Rear center armrest: attaching the protective
cover
~
Fold the rear center armrest and the cover
located behind it down.
~
Press the button to remove the protective
cover ¢
fig. 70.
~
To protect the front area of the center arm-
rest, position the cover as illustrated
¢
fig. 71 and press the suction cups down so
they adhere.
~
Remove the ski sack and unfold it.
Seats and storage 71
Loading and securing the ski sack
Applies to vehicles: with pass-through and ski sack
--
~
--
·-- --·
--- -~-
Fig. 72 Luggage compar tmen t : pass-through in t he
backrest
Fig. 73 Rear bench seat: securing the ski sack
Loading
~
Fold the pass-through cover in the luggage
compartment down
c:;, fig. 72.
~
Slide the pointed end of the skis into the ski
sack first¢ ,&.. The front pa rt of the bind-
ings must be directly under the securing
strap on the ski sack @ ¢
fig. 73.
Securing
~
Insert the securing strap @ on the ski sack
into the center safety belt latch ©
c:> fig. 73 .
~
Tighten the securing strap @ .
Securing (vehicles with full-length center
console)
In the pass-through, two securing straps are
in the hooks located in the luggage compart-
ment .
~
Hook the hooks into the front tie-downs in
the luggage compartment .
~
Tighten the securing strap @ in the rear.