lL
t:0
....
"'
......
"'
....
0
0
:c
'<I"
Using contacts
Applies to: veh icles with te lephone
Fig. 170 Calling a cont act
Fig. 171 Selec tin g a destina tion
.,. Select : the ITEL! button > Directory> a contact
from the directory.
- Call: select and confirm the desired telephone
number.
Or: select the desired phone number
and press the
Call control button.
- Navigate: select and confirm the desired desti-
nation (!) ¢
fig. 171. Or: select the desired des-
tination and press the
Navigate control button.
To start navigation, select and confirm
Start
route guidance.
If no destination is set, you can set a mailing ad-
dress @ as a destination by selecting and con-
firming the desired address when an address
card is open.
Read contact
The MMI automatically creates a name tag for
each entry in the directory that can be read by the
MMI.
Telephone
Create copy for editing/Edit contact
A copy of the contact is stored in the private local
MMI memory.
You can change the information in the input
fields ¢ page 154 using the speller.
Storing a contact in the public directory
You can mark a contact as one of the Shared con-
tacts~ -
The contact is then stored in the local
MMI memory (public) @ ¢
fig. 171 and is availa-
ble to all MMI users. If a contact is not marked as
one of the
Shared contacts, it is stored in the lo-
cal MMI memory (private)
(D and is only visible
when the cell phone, in which the contact is
saved, is connected.
Delete contact
Only the contacts in the MMI memory (private/
public) can be deleted.
u) Tips
- Contacts edited in the MMI directory cannot
be automatically updated in the connected
cell phone. Audi recommends editing cell
phone contacts directly in the cell phone .
- Only the contacts in the MMI memory (pri-
vate/public) can be edited or deleted .
- To delete all shared or private contacts at
one time, select the
Delete shared contacts
or Delete private contacts option in the di-
rectory settings
r::!;> page 157.
153
To Next Page
Loading...
