Audi A8 2018 - Garage Door Opener (Homelink)

lL
t:0
....
"'
......
"'
....
0
0
:c
'<I"
The following buttons are deactivated when the
valet parking function is switched on:
-1""'1 button in the driver's door
- I""' I button on the remote control key
- Handle in the rear lid
When the valet parking function is switched on,
the message
Valet parking activated appears in
the instrument cluster display when you switch
the ignition on.
Garage door opener
(Homelink)
Description
Applies to: vehicles with garage door opener (Homeli nk)
Fig. 42 Garage door opene r: examples of usage for differ-
ent systems
With the garage door opener (Homel ink), you
can activate systems such as the garage doors,
security systems or house lights from inside your
vehicle. Three buttons are integrated in the head-
liner that can be programmed to up to three re-
mote controls.
To be able to operate systems using the garage
door opener, the buttons in the headliner must
first be programmed .
A WARNING
When operating or programming the garage
door opener, make sure that no people or ob-
jects are in the area immediately surrounding
the equipment. People can be injured or prop-
erty can be damaged if struck when closing.
Opening and closing
(D Tips
- For security reasons, we recommend that
you clear the programmed buttons before
selling the vehicle.
- For add itiona l information about Homelink,
visit www.homelink.com.
- For an explanation on conformity with the
FCC regulations in the United States and the
Industry Canada regulations, see
¢page 339.
Programming buttons
Applies to: vehicles with garage door opener (Home link)
Fig. 43 Headliner: controls
You can program both fixed code and rolling code
systems using this procedure.
Programming/reprogramming buttons
.. Switch the ignition on.
.. Press and hold the button in the headliner that
you would like to program for at least 10 sec-
onds. Or
.. Select: !CAR! function button>
Car systems
control button > Vehicle settings > Garage
door opener > Program garage door opener.
.. Follow the instr uctions in the Infotainment sys-
tem.
Deleting button programming
The programmed buttons cannot be deleted indi-
vidually. They must be deleted all at once . Repro-
gram the buttons if necessary .
.. Select: the ICAR!function button> Car systems
control button > Vehicle settings > Garage
door opener > Clear program settings
> Yes.
41