Audi Q4 e-tron 2024 - Adjusting the Display

89401272186
Instrument cluster
Information is organized within various tabs @) in
the instrument cluster. The tab contents are
displayed in the central area @).
Requirement: the ignition must be switched on.
Selecting a tab
> Press the </> button @) repeatedly until the
desired tab is selected, or
> To operate using gestures, swipe your finger to
the right or left in area @) until the desired tab
is selected.
Returning to functions at higher levels
» Press the > button ©).
Opening and closing the menu
» Press the ] button ©.
Selecting and confirming a function
Requirement: a menu or list must be displayed.
» To select a function, press the 7 / = button @
repeatedly until the desired function is select-
ed, or
> To operate using gestures, swipe your finger up
or
down in area @ until the desired function is
selected.
> To confirm a selection, pres:
Switching the view
» Press the VIEW button @) = page 15.
Overview of the tabs
Depending on vehicle equipment, the following
tabs may be available:
‘Symbol Description
Vehicle functions
Driver messages (this is only dis-
played if at least one indicator
light/message is being displayed)
Multimedia
Telephone
Navigation
Adjusting the display
‘Applies to: Audi virtual cockpit
Fig. 6 Center display: adjusting the display
Depending on vehicle equipment, you may be
able to change the view or the layout in the Audi
virtual cockpit.
Switching the view
» Press the VIEW button to switch between the
default view @ and the enhanced view @)
Adjusting the layout
Depending on the vehicle equipment, various lay-
outs may be available.
» Applies to: MMI: Select on the home screen:
SETTINGS > Display & Brightness > Audi virtu-
al cockpit.
> To adjust the desired layout, press @).
Adjusting the additional display
Depending on the vehicle equipment, the addi-
tional displays that can be selected may vary.
» Applies to: MMI: Select on the home screen:
SETTINGS > Display & Brightness > Audi virtu-
al cockpit > Configure.
» Select the desired additional display.
Reducing the display
» Select on the instrument cluster: vehicle func-
tions tab > I button > Reduced display.
» Depending on vehicle equipment, you can press
the VIEW button on the multifunction steering
wheel.
15
OwnersManuals2.com