Audi Q4 e-tron 2024 - Connected Devices

8940127218G.
Additional settings
» To start the update, exit and lock the vehicle.
The MMI will start the installation. When the up-
date has ended, a notification will be displayed.
To ensure the installation is completed suc-
cessfully, the ignition must not be switched
on during the installation.
Read the information about Audi connect, and
be sure to note the section about connectivity
costs © in General information on
page 185.
Connected devices
isplayed connected devices
Requirement: the vehicle must be stationary.
» Applies to: MMI: Select on the home screen:
SETTINGS > Connected devices.
Possible menu items:
~Telephone 1
~Telephone 2
~ Audio player
— Wi-Fi hotspot
— Headset
Smartphone interface
You can connect your smartphone to the MMI
page 222.
myAudi app
This function is available if an appropriate Audi
app is installed on your mobile device and start-
ed, and if the mobile device is connected to the
vehicle's Wi-Fi hotspot.
Read the information about Audi connect, and
be sure to note the connectivity costs section
page 185.
Managing connected devices
Requirement: the connected devices menu must
be displayed > page 227.
Connecting a device
Requirement: Bluetooth visibility must be acti-
vated in the MMI ® page 225 and mobile device.
» Press on a menu item, such as Telephone 1.
» To search for and connect your mobile device,
press New connection © page 174.
Selecting a connected device
» Press on a menu item, such as Telephone 1.
» Press on the desired mobile device in the list of
displayed devices. The connection will be made.
Disconnecting a connected device
» Press on a menu item, such as Telephone 1.
» Press on the connected mobile device. The se-
lected mobile device will be disconnected from.
the MMI.
Deleting a device
» Press on a menu item, such as Telephone 1.
» Press and hold an element until the Options
menus displayed.
» Press Delete.
If a device is listed multiple times, it will be de-
leted from all menu items.
Adi ional options
Depending on the selected function, additional
options may be available.
Requirement: the connected devices menu must
be displayed > page 227.
» Press on a menu item, such as Telephone 1.
» Press and hold an element until the Options
menuis displayed.
Bluetooth® profiles
You can switch desired profiles on or off sepa-
rately in the MMI.
227
OwnersManuals2.com