Audi Q4 e-tron 2024 - Electric Range; Map Update

89401272186
Navigation
» Applies to: MMI: Select on the home screen:
NAVIGATION > ©} > Map settings > Satellite
map”).
The map view is based on data packets received
from the Internet in the form of satellite images,
which are then combined with the roadways from
the © page 197, fig. 137 standard map view.
—The satellite map” is updated regularly.
whenever the function is opened. The proc-
ess may take several seconds.
— Depending on the Internet connection, the
standard map may also be displayed when
the satellite map is switched on).
Electric range
Applies to: vehicles with electric range display
Fig. 141 Electric range display
The electric range shows the distance that can be
driven using electric power. Information such as
the type of road, speeds, and altitude will be tak-
en into account.
» Applies to: MMI: Select on the home screen:
NAVIGATION > © > Map settings > Range
map.
@ Depending on environmental conditions, the
start of the colored section shows the proba-
ble minimum electric range for your vehicle.
@® The border indicates the maximum electric
range for your vehicle under optimal condi-
tions.
1) Audi provides access to services from third party provid-
ers. Permanent availability cannot be guaranteed, because
that depends on the third party provider.
Map update
Introduction
Applies to: vehicles with navigation system
You can update the map data in the MMI with a
map update. The functions depend on the coun-
try and vehicle equipment.
Map update through online map update
page 201.
— Import a map update from the USB connection
to your MMI <> page 202.
Online map update
Applies to: vehicles with online map update
Using the online map update, you can update the
map content for your navigation system in your
vehicle.
The MMI determines regions based on the vehicle
position. Based on this, update data for these re-
gions are available for your MMI.
Starting the update
Requirement: the MMI must be connected to the
Internet > page 185, Audi connect.
> Applies to: MMI: To allow automatic map up-
dates, select on the home screen: SETTINGS >
System maintenance > Automatic online map
update. The MMI starts the map update auto-
matically in the background when new map ma-
terial is available.
You can check the status of the download process
and the installation in the notification center
= page 23.
Read the information about Audi connect, and
be sure to note the connectivity costs section
Qin General information on page 185.
201
>
OwnersManuals2.com