Audi Q4 e-tron 2024 - Page 50

Opening and closing
» To delete an individual system, press the
button for the desired system. If the checkmark
¥ is set, select: Delete.
» To delete all systems, select: All > Delete.
—Make sure the batteries in the hand trans-
mitter are charged before starting the pro-
gramming process.
—The programming process may take up to
30 seconds. It may be necessary for the
hand transmitter to be pressed again in the
meantime.
~The garage door opener may need to be
synchronized with the system after pro-
gramming. Follow the manufacturer's in-
structions for doing this.
In some cases, the system may need to be
programmed in a different mode (“D mode").
— Switch the ignition on.
Applies to: MMI: Select on the home screen:
VEHICLE > Settings & Service > Garage
opener.
= Press and hold the desired button @.
= Select Yes, in D mode and follow the in-
structions on the MMI.
48
OwnersManuals2.com