22 Dr iver in f ormation sy st e m
the calcu lation of the current trip informa-
tion. If the trip is interrupted for
more t han 2
hours
the memory is reset automatica lly.
Total -trip m em ory (Trip computer 2 )
Unlike the sing le-trip memory, the total-trip
memory is not reset automatically. This per-
mits you to evaluate your driving data for the
entire period between manual resets.
Efficiency prog ram*
The efficien cy program can help you to use
less fuel~
page 25.
Operation
The trip computer is controlled by two
switches on the windshield wiper lever.
-----------< @
Fig. 10 Wiper arm/w iper lever: controls for the trip
computer
Select ing the t rip computer
"Tap the I Reset I button @ until the trip com-
puter (memory level 1 or 2) appears in the
display¢page21,
fig . 8 .
Select ing the function s
" Push in the upper (lower) protrusion on the
function selector switch @
q fig. 10. The
functions for the trip computer are d is-
played in succession on the respective mem-
ory levels.
Resetting the function to zero
" Push the I Reset I button @ for at least two
seconds.
You can reset the fo llowing values to zero us-
ing the
I Reset I button:
- driving time
- distance
- average fuel mileage
- average speed
The t rip computer only operates when the ig-
nition is on. When you turn on the ignition,
the function that was in use when you last
tu rned the ignition off will be displayed.
(D Tips
- You can also set the values for the func-
tions to zero in the menu disp lay
(Reset)
qpage22.
- All stored values will be lost if the vehi-
cle battery is d isconnected.
- The driving information in the eff iciency
program is a lso reset to zero with the
sing le-trip memory.
Menu display
Introduction
Display Type
•set
iF'Cft -,,., ==
Menu off
Fig. 11 Display: Start menu
Some functions in your vehicle ca n be set, ac-
t ivated, and cont rolled by
Menus (e.g. Acous-
tic park assist *). With these menus yo u can al-
so select the information shown in the driver
information system, which operates only with
the ignit io n sw itched on. Operation is control-
led by the
!Reset I button and the rocker switch
on the wiper lever
qpage 23, fig. 12.
The Start menu shows you the different dis-
play types:
Set
Check
Menu off
To Next Page
Loading...
