24 Dr ive r information system
Selec- Selected func- Meaning
tion tion
bar
0
Box
Not selected
•
Triangle point - Previous page
ing up
•
Triangle point- Next page
ing down
Selecting settings
The Driver Information System settings are
menu-guided .
Fig. 14 Display: Menu Set tings , computer selected
(page l)
Select your settings as follows :
• Press the !Reseti button. The Start menu ap-
pears
c;, page 22, fig. 11.
• Press the rocker switch until Set is dis-
played.
• Press the
I Reseti button. All the menus ap-
pear.
• Press the rocker switch until the desired line
is highlighted (cursor)
c;, fig. 14.
• Press the I Reset i button.
• If necessary, scroll by selecting and activat-
ing the symbol for "Next page" or "Previous
page".
When you have selected the Computer menu
and activated it by pressing the !Reseti but-
ton, two computer levels appear (computer 1
and computer 2). Now you have to select the
level you want using the rocker switch and ac-
tivate it w ith the
I Reset I button .
Engine oil temperature display
Applies to vehicles: with engine temperature cont rol dis-
play
Fig. 15 Display : eng ine oil temperature display
;
ci..
a,
ID
• With the ignition switched on, press the
!RESETi button
¢ page 22, fig. 10 repeated-
ly until the engine oil temperature display is
shown.
The engine has reached its operating temper-
ature when the engine oil temperature is be-
tween
176 °f (80 °C) and 248 °f (120 °C) un-
der normal driving conditions. The engine oil
temperature may be higher if there is heavy
engine load and high temperatures outside .
This is not a cause for concern as long as the
• ¢ page 14 or II ¢ page 17 warn ing light
in the display does not flash .
Boost and engine oil temperature
indicator
Applies to vehicles: with boost pressure indicato r
0
~
00
0
;;i
a,
Fig. 16 Display: boost and eng ine oil temperature indi-
cator
• With the ignition switched on, press the
button -arrow- repeatedly until the display
is shown . ..,.
To Next Page
Loading...
