EasyManua.ls Logo

Audi TT 2014 - Page 50

Audi TT 2014
252 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48 Clear v ision
- Make sure t he washer f luid reservoir in
the engine compartment is topped
off
before going on a long t rip . Look up
c:> page 186 for checking and fi lling the
washer container.
- The w ipers only operate w ith the hood
completely closed.
Headlight washer system
Applies to vehicles: with headlig ht washer system
The headlight washer system cleans the
headlights.
., Operate the win dshield wiper/washer sys-
tem
c:> page 46, fig. 49 ® with the head-
li ghts turned on by holding the lever for lon-
ger than one second.
The washer jets extend forward out of the
fro nt bumper driven by water pressure to
spray the fr ont headlights with water.
You should inspect the headlights regularly
(for example when refue lin g) and clean
off
any solid dirt or insects from the lenses.
To ensure t he system works properly in winter,
keep the washer jets free of snow and remove
any ice using a de-icing spray.
Service position
It is only possible to change wiper blades if
you move the wiper arms to the service posi -
tion.
I n order t o use the win dshield wipers, the
front lid must be comp lete ly closed.
Moving wiper blades to the service
position
., When t here is a risk of fr ost, make sure that
the wiper blades are not frozen t o t he wind -
shield .
.. Switch the ign ition on.
., Move the wiper lever t o position
0
c:> page 46, fig. 49 .
., Press the I Reset I button until the Display
type menu appears in the Driver Info rma-
t ion System display .
., Using the rocker switch and the
I Reset! but -
ton, select the
Set > Wipe rs > Front > Serv-
ice position on
funct ion. The w indshield
w iper arms move to the service posit ion.
Moving wiper blades to park position
., Make certai n t hat the w iper arms are lying
against t he win dshield .
., Switch t he ignit ion on and move the wipe r
lever from position
O to 4 c:> page 46,
fig. 49. The wiper arms will move back to
the park position.
@ Note
Never drive your vehicle when the wind-
shield wiper arms are in t he service posi-
tion and pulled away fr om the winds hield.
When yo u dr ive f ast er t han
4 mph (6 km/
h), the wiper arms aut omatically return to
t he park position and could cause paint
dam age to t he fron t lid!
@ Tips
- You can also tur n on t he service posit ion,
f or example, if you want to protect the
w indshield fr om icing by using a cover.
- The service posit ion moves t o
off auto -
matically whe n you operat e the w ind-
shield wi per lever, or speed exceeds
4 mph (6 km/h ).
Cleaning windshield wiper blades
Clean the windshie ld w iper blades when they
begin to leave st reaks.
., Place t he windsh ield w iper arms in the serv-
ice posit ion. Ref er t o
c:> page 48 .
., Use a soft cloth and glass cleaner to clean
the windshield wiper blades .
A WARNING
Dirty winds hield wiper blades can impair
your view. This can lead to accidents.

Table of Contents

Related product manuals