32
POWER OUTPUT CONNECTIONS
NEVER SHORT-CIRCUIT the amplifier output terminals.
NEVER CONNECT the amplifier output terminals to any device other than loudspeakers.
NEVER CONNECT the left channel output terminals to the right channel output terminals.
The unit is however provided with a safety device against short circuits in the output terminals.
In case, the amplifier turns off (for additional information, refer to the section “PROTECTION” at
page 39).
The connection posts accept both hook lugs and bare cable. Recall that the spade lugs are not
allowed since they are considered “not safe” by the current safety standards.
Remember to tighten the posts, to prevent false contacts.
Remember also to respect the polarity, connecting the positive polarity of the cable to the red
terminal and the negative of the cable to the black terminal. The same on the speakers.
The use of power cables of the highest quality is recommended.
CAUTION
To Next Page
Loading...
