Audio Technica AT-LP120-USB User Manual

2
Audio-Technica USB Turntables
Contents
A note about software 2
System requirements 2
Installing Audacity software for Mac OSX and above 3
Setting up your Mac (OSX and above) to work with your USB Turntable 4
Additional Mac audio settings 6
Installing Audacity software for PC 7
Setting up your PC (with Windows XP) to work with your USB Turntable 8
Setting up your PC (with Windows Vista) to work with your USB Turntable 11
Setting up your PC to work with Audacity 13
Recording albums with Audacity 15
To learn more about Audacity 15
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Windows
is a registered trademark of Microsoft Corporation in the U.S. and other countries.
A note about software
Your Audio-Technica AT-LP60-USB or AT-LP120-USB turntable is supplied with Audacity
recording software for your convenience. Please note that other third-party recording
software packages are also compatible with this turntable.
Audacity is free software, distributed under the GNU General Public License (GPl). More
information
and open source code is on the included Audacity CD and on the Audacity
web site: http://audacity.sourceforge.net
System Requirements
PC or Mac with an available USB port (USB 1.1 or higher)
CD-R or CD-RW writer for burning CDs & installation
Audacity requires:
Mac running
OSX or above or
PC running Windows (XP and above)

Audio Technica AT-LP120-USB Specifications

General

Interface	USB, Analog
Signal-to-Noise Ratio (SNR)	50 dB
AC adapter frequency	50/60 Hz
AC adapter input voltage	115 - 230 V
Power consumption (typical)	11 W

Weight and Dimensions

Weight	10700 g
Product dimensions (WxHxD)	450 x 352 x 157 mm