Audio Technica AT-LP120-USB User Manual

Setting up your PC (with WindowsVista) to work with your USBTurntable
4. Select the Playback tab. Select your internal sound card speakers (these are
usually the first listed).
5. Click Apply; then click OK.
6. Close your Control Panel.
Speakers
SigmaTel C-rvlajor Audio
Working
Speakers
USB Audio CODEC
\II/orking
4
Configure
.~_S_e_t_D._e_fa_u .. _lt---------, [proP-=-~ie$ -J
12
L OK
JI cancel
Apply

Audio Technica AT-LP120-USB Specifications

General

Interface	USB, Analog
Signal-to-Noise Ratio (SNR)	50 dB
AC adapter frequency	50/60 Hz
AC adapter input voltage	115 - 230 V
Power consumption (typical)	11 W

Weight and Dimensions

Weight	10700 g
Product dimensions (WxHxD)	450 x 352 x 157 mm