Need help?Do you have a question about the Audio Technica AT-LP3 and is the answer not in the manual?
General| Type | Belt-drive audio turntable |
|---|---|
| Operation | Fully automatic |
| Motor type | DC motor |
| Output level | 220 mV |
| Product color | White |
| Wow & flutter | 0.2 % |
| Output voltage | 3.5 mV |
| Platter material | Aluminum |
| Turntable speeds | 33 1/3, 45 RPM |
| Signal-to-Noise Ratio (SNR) | 60 dB |
| Overhang | 19 mm |
| Tonearm type | Statically balanced tonearm |
| Tracking angle | 3 ° |
| Tracking force range | 1.5 - 2.5 g |
| USB ports quantity | 0 |
| Quantity | 1 |
| Counterweight | Yes |
| Cables included | AC |
| AC adapter frequency | 50/60 Hz |
| AC adapter input voltage | 220 - 240 V |
| Power consumption (typical) | 2 W |
| Package depth | 480 mm |
| Package width | 520 mm |
| Package weight | 6900 g |
Weight and Dimensions| Depth | 353 mm |
|---|---|
| Width | 435 mm |
| Height | 128 mm |
| Weight | 5200 g |
To Next Page