4. Remove the record after the platter has come to a complete stop.
5.
6. Lower the tonearm by moving the tonearm lift control lever to the DOWN position. The tonearm descends
slowly onto the record and play begins.
Alternatively, you can skip steps 2 to 4, and use your fingers to lift the headshell, move the tonearm over
the desired location on the record, and then place the headshell down to begin playing the record.
Do not subject the product to strong impact during playback
Pausing the record
1. After lowering the volume of the amplifier, speakers, etc., sufficiently, lift the tonearm with the tonearm lift
control lever.
Stopping the record
1. Lower the volume of the amplifier, speakers, etc., sufficiently.
2. Lift the tonearm lift control lever, return the tonearm to the tonearm rest, and fix it with the clamp.
3. Turn the control knob to the “STOP” position.
The platter slows down and rotation stops
To Next Page
Loading...
