33 stop 45
4. Remove the record after the platter has come to a complete stop
If the turntable mat gets dirty, it can easily scratch the record, so remove the turntable mat periodically and wipe
off any dust.
To prevent the record from becoming scratched or warped, remove it after use.
Do not use a platter other than the one provided.
This product is not intended for DJs. Do not touch the record or the turntable mat while the record is playing
Care
Turntable body
When the turntable body is dirty or dusty, first disconnect the AC adapter’s cord from the power input jack, and
then wipe off the dirt and dust with a soft, dry cloth.
Do not use benzenes, thinners, etc.
When storing the product for a long time, disconnect the AC adapter’s cord from the power input jack and the
power cable plug from the outlet then wrap the equipment in plastic; do not allow it to become damp.
Stylus tip
If dirt and grime are stuck to the stylus tip, clean it with a commercially sold brush.
We recommend using a stylus cleaner (sold separately) if the stylus tip is considerably dirty. Clean the stylus tip
by moving the brush from the rear to the front of the stylus tip.
To Next Page
Loading...
