Removing the stylus
In addition to the deterioration of sound quality, records may also be damaged as the cartridge’s stylus tip
wears down.
As a rule of thumb, replace the stylus after 300 hours of use.
Be sure to disconnect the product’s power cable plug from the outlet.
1. Release the headshell from the tonearm.
Fix the tonearm with the clamp and then remove the headshell gently.
2. After lowering the cartridge’s protector, remove the stylus by pulling in the direction of the arrow.
Installing a new replacement stylus
1. Mount the new replacement stylus to the cartridge. Align the position of the inner protrusion.
2. Mount the headshell onto the tonearm.
To Next Page
Loading...
