Audio bit Ten - Product Description and Precautionary Notes; Important Warnings and Requirements

ADVANCED MANUAL / bit Ten /
3
WARNING: 1- a PC provided with Windows XP, Windows Vista, Windows 7 or Windows 8 operating system,
1.5 GHz minimum processor speed, 1 GB RAM minimum memory and a graphics card with a minimum
resolution of 1024 x 600 pixels are required to install the software and setup the .
2- Before connecting your bit Ten, carefully read this manual. Improper connections may cause damage to
the bit Ten or to the speakers in the car audio system.
1. PRODUCT DESCRIPTION / PRECAUTIONARY NOTES
The bit Ten is a digital signal processor essential to maximize the acoustic performance of your car audio system.
It consists of a 32-bit DSP processor and 24-bit AD and DA converters.
It can connect to any factory system, even in vehicles featuring an integrated audio processor, since, thanks to the
de-equalization function, the bit Ten will send back a linear signal.
It features 7 signal inputs: 4 Hi-Level, 1 Aux Stereo, 1 Phone and provides 5 PRE OUT analog outputs.
Each output channel has a 31-band equalizer available. It also features a 66-frequency electronic crossover as well as
BUTTERWORTH or LINKWITZ filters with 6-24 dB slopes and a digital time delay line. The user can select adjustments
that allow him or her to interact with the bit Ten through a remote control device called DRC.
2. PACKAGING CONTENTS
- bit Ten - Signal Interface Processor
- DRC (Digital Remote Control) control panel
OPTIONAL:
- 2 fixing brackets with 2.9 x 6.5 mm
self-tapping, cross-head screws
- 4.5 m / 177.16” DRC - AC Link cable
- Power supply cable / Remote / Inputs
- 3.0 m / 118.11” USB cable
- 4 of 4.2 x 20 mm self-tapping,
cross-head fixing screws
- CD ROM with:
bit Ten 1.0 software
This advanced manual (.pdf format)
Test tracks
- Quick start guide
- Warranty
1/2
1.1
1.1a
1.1a
1.1