AudioCodes 400HD Series - Configuring a Periodic Provisioning Cycle

CHAPTER6 Performing Administrator-Related Operations
C448HD C450HD | Users & Administrator's Manual
ThisURLisdisplayedintheDeviceManagerpageunderSetup>DHCP Options Configuration.
After devices  are  added  to  the  Device  Manager, they're  allocated  to  tenants  by selecting 
Change Tenant  inthe  ‘Actions’ menu.  Unless already  used, it's  recommended to leave  the
default tenantas a‘lobby’  forthe new devices. The aboveURL canalso  beconfigured in
AudioCodes'RedirectServer.Android-basedTeamsdevicescurrentlysupport:
■ Provisioningofconfiguration
■ Provisioningoffirmware
■ SwitchingtoUC/Teams
■ Monitoring(basedonperiodicKeep-Alivemessagessentfromdevices)
■ Resettingthedevice
TheDeviceManager's‘internal’functions(whichdon'tinvolvedevices)are:
■ Changetenant
■ Changetemplate
■ Showinfo
■ GenerateConfiguration
■ Deletedevicestatus
■ Nickname
Actionsthatgobeyondthedevices’periodicprovisioningcyclewillbesupportedinnext
releases.TheCheck StatusoptionisirrelevantforAndroid-basedTeamsdevicesthereforeit's
omittedfromthe'Actions'menu.
● To change a device's configuration, see the Device Manager Administrator's
Manual. Changing a device's configuration using the Device Manager is the
same for Android-based Teams devices as for UC devices.
● To commit a change made at the template/tenant/site/group/user level, perform
Generate Configuration. The change can be validated in the device’s .cfg file.
The Android-based endpoint pulls the updated configuration when the next
periodic provisioning cycle occurs.
Configuring a Periodic Provisioning Cycle
Networkadministratorscanconfigurehowoftenperiodicprovisioningcycleswilloccur,tosuit
enterprisemanagementpreference.
➢ To configure how often periodic provisioning cycles will occur:
■ Usethefollowingtableasreference.
- 99 -