AudioCodes 400HD Series - Configuring Wi-Fi

CHAPTER3 Starting up
C448HD C450HD | Users & Administrator's Manual
Setting Description
SwitchtoTeamsCompatible(notapplicabletotheC448HDphone)
Factorydatareset(theequivalentofrestoretodefaults;including
logoutanddevicereboot)
ADB(AndroidDebugBridgecommand-linetoolusedtodebugthe
Teamsapp);thesettingisdisabledbydefault.Thedevicedoesnot
allowaccesstoADB.
ScreenCapture.Bydefault,thissettingisenabled.Ifit'sdisabled,the
phonewon'tallowitsscreenstobecaptured.
Configuring Wi-Fi
[Applies  to devices whose PN indicates DBW ] Network administrators can configure Wi- Fi 
parametersforthephone.Theparametersareconcealedfromtheuser'sview.
Additionally,networkadministratorscanconfigureWi-FisettingsviatheConfigurationFile.The
Wi-FisettingsapplicationonthedeviceandtheConfigurationDatabasearesynchronized.
Usethefollowingtableasreference.
Only applies to the C450HD phone.
Table 3-2: Wi-Fi Parameters
Parameter Description Values
network/wifi_enabled Enables/disablestheWi-Fifeature. 0(disable,
default)
1(enable)
network/wifi_pc_bridge EnablesnetworkconnectivityforthePC
behindthephone;fordebuggingpurposes.
0(disable,
default)
1(enable)
network/wifi_ipv4_method DefinestheDynamicorStaticIPaddressfor
Wi-Fi.
DHCP
(default)
STATIC
network/wifi_channel_mode EnablestheWi-Fichannelmode:
■ 2.4Gonly
■ 5Gonly
■ 2.4G+5G
5G_2_4G
(default)
2_4G_
ONLY
5G_ONLY
- 34 -