CHAPTER6 Performing Administrator-Related Operations
C448HD C450HD | Users & Administrator's Manual
After a location has been defined, make sure that:
● AudioCodes' phone runs the latest firmware released.
● AudioCodes' phone runs the Teams app issued June 2022 and later (U3-A and
higher).
● E911 information is displayed on the phone screen 30-120 minutes after the
location is set (time estimated under laboratory conditions).
● To trigger information to be shown before that time period, you can:
✔ Dial a 933-test call and check if the location has been accepted, displayed
and vocalized by the announcer.
✔ Enter the 'Calling' menu from the phone's home screen and verify the
location is presented there (entering the 'Calling' menu triggers the
information to be pulled from MS servers).
- 85 -
To Next Page
Loading...
