Configuration Note 5. Configuring the E-SBC Device
Version 1.0 Issue 1.0 59 October 2011
Figure 5-24: Destination Phone Number Manipulation Table for Tel -> IP Calls Page
• Index #0 defines destination number manipulation of IP calls from PAETEC
SIP Trunk. All calls received from Source IP Group 1 (i.e., from PAETEC SIP
Trunk) and the destination number prefix begins with ‘+’, do not perform any
changes to the number.
• Index #1 defines destination number manipulation of IP calls from PAETEC
SIP Trunk. All calls received from Source IP Group 1 (i.e., from PAETEC SIP
Trunk) and the destination number prefix begins with '1', add the ‘+’ prefix to
the number.
• Index #2 defines destination number manipulation of IP calls from PAETEC
SIP Trunk. All calls received from Source IP Group 1 (i.e., from PAETEC SIP
Trunk) and the destination number length is 10 digit number, add the ‘+1’
prefix to the number.
To Next Page
Loading...
