Need help?Do you have a question about the AudioCodes MP-524 and is the answer not in the manual?
General| Model | MP-524 |
|---|---|
| PoE | No |
| Speakerphone | No |
| Headset Port | No |
| Ports | 4 FXS |
| Network Interface | 10/100 Ethernet |
| Protocols Supported | SIP |
| Voice Codecs | G.726 |
| Operating Temperature | 0° to 45°C |
| Humidity | 10% to 90% (Non-condensing) |
Procedure for safely opening the device carton and checking contents.
Details device physical specifications and environmental operating parameters.
Description of front panel components and detailed status for POWER, STATUS, AC, DC, FXS, and LAN LEDs.
Details the rear panel connectors and interfaces, including WAN ports and their LED status.
Instructions for placing the device on a desktop or shelf.
Step-by-step guide for mounting the device in a standard 19-inch rack.
Essential guidelines for electrical grounding and surge protection.
Procedure for connecting the device to a Local Area Network (LAN).
Instructions for establishing a Wide Area Network (WAN) connection.
Details on connecting analog phones and related surge protection for FXS lines.
Steps for connecting FXS interfaces using an AudioCodes FXS Patch Panel.
Guide for connecting FXS using a 50-Pin D-Sub to open leads cable.
Instructions for connecting external USB storage devices.
Procedure for establishing a serial connection for device management.
Steps for connecting the device to a standard AC electrical outlet.
Instructions for connecting the device to a DC power source.
To Next Page