AUMA AMExC 01.1 User Manual

59
Actuator controls AUMA MATIC AM/ AMExB/ AMExC
Operation instructions Modbus
Index
A
Actuator functions 41
AUMA plug/ socket connector 10
B
Basic functions 6
Basic signals 27
Blinker transmitter 47
Bus access 6
Bus cable 18,19
Bus connection 18
C
Cable capacity 19
Cable recommendation 19
Characteristic impedance 19
Collective fault signal 47
Commissioning 23
Communication 6
Connection board 10,12
Controls 10
Core cross section (bus cable 19
Core diameter (bus cable) 19
Corrosion protection 5
D
Dead band 26,42
Dead time 26,42
E
Electrical connection 4,11
Error 26
Error variable 26
F
Failure function 43
Fault signals 27
Faults 26,48
H
Handwheel 43
I
Indication lights 10
L
Limit seating 26
Literature 57
Local controls 10
Loop resistance 19
M
Maintenance 4
Measuring the Modbus signals 51
Motor connection 17
Motor protection 27
N
Name plate 15
O
Operating time 42
Overrun 36,42
Overvoltage protection 13
P
Parameter
Coding 37
Coding analogue 3/4 38
Dead time positioner 36
Delay time for failure operation 35
End analogue 37
End analogue 3/4 in 0.1 mA 37
Failure behaviour 35
Failure operation 35
Failure position 35
Max. error 36
Measured data coding 34
Overrun direction CLOSE 36
Overrun direction OPEN 36
Position transmitter 34
Redundancy 34
Reversing prevention 34
Start analogue 37
Start analogue 3/4 in 0.1 mA 37
Stepping 38
Stepping direction
CLOSE active 39
Stepping end CLOSED
in per mil 40
Stepping end OPEN in per mil 39
Stepping operating time
CLOSE in 0.1 s 39
Stepping operating time
OPEN in 0.1 s 38
Stepping pause time
CLOSE in 0.1 s 39
Stepping pause time
OPEN in 0.1 s 38
Stepping start
CLOSE in per mil 39
Stepping start
OPEN in per mil 38
Time for channel changing 35
Parking frame 15
Part-turn actuators 10
Phase failure 41
Plug/ socket connector 10,15,16
Position transmitter 41
Position transmitter RWG 14
Positioner 41
Power supply 11
Process representation 32
Protective functions 6
Push-to-run operation 47
R
Reversing contactors 10
S
Safety instructions 4
Screening (bus cable) 19
Seating 47
Selector switch 10
Self-retaining 47
Signals 26
Stepping mode 38,42
Storage 5
Switching-off point 42
T
Technical data 7,8,9,16
Termination resistors 10,12
Thyristors 10
Torque switching 14
Transfer mode 6
Transport 5
Trouble shooting and corrective
actions 48
W
Wall bracket 14
Warning signals 28
Warnings 4,26
Wiring diagram 52
Information also available on
the Internet:
Wiring diagram, inspection records and further actuator information
can be downloaded directly from the Internet by entering the order no. or
COMM. no (refer to name plate).
Our website: http://www.auma.com

AUMA AMExC 01.1 Specifications

General

Brand	AUMA
Model	AMExC 01.1
Category	Control Unit
Language	English