AUMA AUMATIC AC 01.2 User Manual

ExplanationSetting valueDefaultAccessParametersTypeNo.
Phase fault
Fieldbus DOUT 1
Fieldbus DOUT 2
Fieldbus DOUT 3
Fieldbus DOUT 4
Fieldbus DOUT 5
Fieldbus DOUT 6
Fieldbus DOUT 7
Fieldbus DOUT 8
Fieldbus DOUT 9
Fieldbus DOUT 10
Fieldbus DOUT 11
Fieldbus DOUT 12
FailState fieldbus
Handwheel active
PVST active
PVST error
PVST abort
Table 67: Profibus
ExplanationSetting valueDefaultAccessParametersTypeNo.
Data length = 4 bytes
Redundancy0 : None
0R/W
Redundancy
enum35-1
1 : DP-V2 (SR)
4 : DP-V2 (FR)
2 : AUMA redundancy I
3 : AUMA redundancy II
Behaviour Tx0 : Tx active channel
0R/W
Behaviour Tx
enum35-2
1 : Tx both channels
Table 68: FO connection
ExplanationSetting valueDefaultAccessParametersTypeNo.
Data length = 6 bytes
FO cable monitoring0 : On (not final device)
0R/W
FO cable monitoring
enum68-1
1 : Off (final device)
FO cable topology0 : Loop
1R
FO cable topology
enum68-2
1 : Star/line
FO cable baud rate0 : Auto
0R
FO cable baud rate
enum68-3
1 : 9.6 kbit/s
2 : 19.2 kbit/s
3 : 38.4 kbit/s
4 : 45.45 kbit/s
5 : 57.6 kbit/s
6 : 93.75 kbit/s
7 : 115.2 kbit/s
8 : 187.5 kbit/s
9 : 500 kbit/s
10 : 1500 kbit/s
11 : 3000 kbit/s
12 : 6000 kbit/s
13 : 12000 kbit/s
74
Actuator controls
Appendix AC 01.2/ACExC 01.2 Profibus DP

AUMA AUMATIC AC 01.2 Specifications

General

Brand	AUMA
Model	AUMATIC AC 01.2
Category	Controller
Language	English