Auma Norm Actuators
Auma Integral Starter Actuators
Actuator Types
This actuator offers a complete actuator type SA
with electric motor, torque switch for open -
close direction, limit switches for both end
positions & blinker switch for running
indication. The required reversing contactor
should be installed separately & wired to the
motor. For signalization of the switching and to
trip the contactors over micro switches, control
wires are required from actuator terminal
compartment cover to reversing contactor
installed separately.
Auma Norm
The purpose of offering Integral motor controls
for the actuator is to enable the customer to save
high installation costs for external controls.
Actuators with integral controls include control
& switching elements and are supplied
All electrical components such as limit, torque,
thermo switches, all monitoring elements &
position transmitter are integrated into modern
controls.This results in following simplification.
ready for use.
- No extensive wiring in the external control
cabinet
Auma Integral Starter
21
Actuator can be operated from Local or
Integral starter housing can be easily
between actuator & integral starter unit.
on the integral starter unit.
Remote position by means of selector switch
Several actuators can be connected to common
actuator.
supply cable using isolating switch for each
Actuator signals are processed in the controls,
only feed back to process control system is
necessary.
exchanged due to multi pin plug connector
-
-
-
-
To Next Page
Loading...
