AUMA SAREx 07.2 - Default Chapter; Table of Contents

Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Store operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Target group:
This document contains information for assembly, commissioning and maintenance staff.
Reference documents:
●
Manual (Operation and setting ) of actuator controls ACExC 01.2 Profinet
●
Manual (Fieldbus device integration) of actuator controls ACExC 01.2 Profinet
Reference documents are available on the Internet at: http://www.auma.com.
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Prerequisites for the safe handling of the product
51.2. Range of application
61.3. Warnings and notes
61.4. References and symbols
82. Identification...........................................................................................................................
82.1. Name plate
112.2. Short description
133. Transport and storage...........................................................................................................
133.1. Transport
153.2. Storage
164. Assembly................................................................................................................................
164.1. Mounting position
164.2. Valve attachments
164.2.1. Design of output drive type A
174.2.2. Design of output drive types B and E
174.3. Handwheel fitting
184.4. Actuator: mount to valve
184.4.1. Stem nut for output drive type A: finish machining
204.4.2. Multi-turn actuator with output drive type A: mount
214.4.3. Multi-turn actuator with output drive type B: mount
224.5. Accessories for assembly
224.5.1. Stem protection tube for rising valve stem
234.6. Mounting positions of local controls
244.6.1. Mounting positions: modify
255. Electrical connection.............................................................................................................
255.1. Basic information
285.2. KL electrical connection
295.2.1. Terminal compartment: open
305.2.2. Cable connection
345.2.3. Profinet cables: connect
2
SAEx 07.2 – SAEx 16.2 / SAREx 07.2 – SAREx 16.2 Control unit: electronic (MWG)
Table of contents ACExC 01.2 Non-Intrusive Profinet