AUMA SAREx 07.2 - Page 4

6910.3.1. Mechanical position indicator: set
7010.3.2. Gear stage of the reduction gearing: test/set
7311. Corrective action....................................................................................................................
7311.1. Faults during commissioning
7311.2. Fault indications and warning indications
7711.3. Fuses
7711.3.1. Fuses within the actuator controls
7811.3.2. Fuse replacement
7811.3.2.1. Replace fuses F1/F2
7911.3.2.2. Test/replace fuses F3/F4
7911.3.3. Motor protection (thermal monitoring)
8112. Servicing and maintenance...................................................................................................
8112.1. Preventive measures for servicing and safe operation
8112.2. Disconnection from the mains
8212.3. Maintenance
8312.4. Disposal and recycling
8513. Technical data.........................................................................................................................
8513.1. Technical data Multi-turn actuators
8713.2. Technical data Actuator controls
9314. Spare parts.............................................................................................................................
9314.1. Multi-turn actuators SA(V)Ex 07.2 – SA(V)Ex 16.2/SAR(V)Ex 07.2 – SAR(V)Ex 16.2 KT/KM
9514.2. ACExC 01.2 KL-Ex d actuator controls
9715. Certificates..............................................................................................................................
9715.1. Declaration of Incorporation and EU Declaration of Conformity
98Index........................................................................................................................................
101Addresses...............................................................................................................................
4
SAEx 07.2 – SAEx 16.2 / SAREx 07.2 – SAREx 16.2 Control unit: electronic (MWG)
Table of contents ACExC 01.2 Non-Intrusive Profinet