6. System configuration
6.1. Settings
SIMA² can be preconfigured based on the order information. This information must
be subject to prior consent with the plant operator as well as the DCS supplier.
The information includes:
●
Number and type of actuators (or other field devices)
●
Baud rate and IP address/Modbus address of SIMA² for communication to host.
●
Baud rate for communication to actuators
●
Highest Station Address (HSA)
●
Timeout values for communication to actuators and host
●
Limits for repeated attempts for establishing communication to the actuators.
20
SIMA² Master Station
System configuration MODBUS RTU, MODBUS TCP/IP to DCS
To Next Page
Loading...
