[5] [6] Equipment ( inter-
faces)
Name plate print indicates the equipment (configuration) of the interfaces.
Configuration of interfaces is also encoded by the SIMA² PO number [1] on the name
plate.
[7] Redundancy
The redundancy indicates whether the current system is a Single Master Station or
a hot standby system redundancy setup and whether the system is arranged in one
joint housing or in two separate housings.
[8] [9] Serial number
Each SIMA² can be unambiguously identified by this number.
Table 1:
Serial number example: 0319WI40040
KW 03Week0319WI40040
2019Year of production0319WI40040
Wenden / GermanyLocation of production0319WI40040
SIMAProduct series0319WI40040
40040Consecutive number0319WI40040
[10] Identification num-
ber
The identification number informs on the production week and comprises information
on the version.
Table 2:
Identification number example: SIMA0119-01A/B
JanuaryMonths of productionSIMA0119-01A/B
2019Year of deliverySIMA0119-01A/B
01Consecutive number in the current
month for each SIMA²
SIMA0119-01A/B
Single Master Station or SIMA A for hot
standby system redundancy (in separate
housings)
ASIMA0119-01A/B
For redundancy only: SIMA B (in separate
housings)
B
Hot standby system redundancy in a joint
housing
A/B
2.3. Short description
Communication with
other actuators
SIMA² controls electric actuators and offers the possibility to operate the overall
fieldbus system.With the standardised connection to the host or easy external
operation via web server or direct on-site operation, SIMA² is the ideal solution to
connect actuators with the host fieldbus interfaces. SIMA² allows integration of AUMA
actuators in different distributed control systems. The complete communication
between host and actuators are controlled by SIMA².
10
SIMA² Master Station
Identification MODBUS RTU, MODBUS TCP/IP to DCS
To Next Page
Loading...
