AUMA SQ Series - AC 01.2 Actuator Controls with S Electrical Connection

88 pages

To Next Page

To Previous Page

15.2. AC 01.2 actuator controls with S electrical connection

SQ 05.2 – SQ 14.2/SQR 05.2 – SQR 14.2 Control unit: electronic (MWG)

Spare parts AC 01.2 Non-Intrusive

Main Page

Table of Contents2
Safety Instructions5
Prerequisites for the Safe Handling of the Product5
Range of Application5
Warnings and Notes6
References and Symbols6
Short Description7
Name Plate9
Transport and Storage13
Transport13
Storage14
Assembly16
Mounting Position16
Handwheel Fitting16
Mount Actuator to Valve16
Overview on Coupling Variants17
Mount Actuator (with Coupling)17
Mounting Positions of Local Controls20
Mounting Positions: Modify20
Electrical Connection21
Basic Information21
S/SH Electrical Connection (AUMA Plug/Socket Connector)23
Terminal Compartment : Open24
Cable Connection25
Terminal Compartment : Close26
Accessories for Electrical Connection27
Actuator Controls on Wall Bracket27
Parking Frame28
DS Intermediate Frame for Double Sealing28
External Earth Connection29
Operation30
Manual Operation30
Manual Valve Operation30
Motor Operation30
Operating the Actuator from Local Controls30
Actuator Operation from Remote31
Menu Navigation Via Push Buttons (for Settings and Indications)32
Menu Layout and Navigation33
User Level, Password34
Password Entry34
Password Change35
Timeout for Incorrect Password Entry35
Language in the Display36
Language Change36
Indications37
Indications During Commissioning37
Indications in the Display37
Feedback Signals from Actuator and Valve38
Status Indications According to AUMA Classification40
Status Indications According to NAMUR Recommendation41
Indication Lights of Local Controls43
Mechanical Position Indication (Self-Adjusting)43
Mechanical Position Indication Via Indicator Mark (Not Self-Adjusting)44
Signals (Output Signals)45
Status Signals Via Output Contacts (Digital Outputs)45
Assignment of Outputs45
Coding the Outputs45
Analogue Signals (Analogue Outputs)45
Commissioning (Basic Settings)46
End Stops in Part-Turn Actuator46
Set End Stop CLOSED47
Set End Stop OPEN47
Type of Seating: Set48
Torque Switching: Set49
Limit Switching: Set51
Test Run52
Direction of Rotation at Mechanical Position Indicator: Check53
Limit Switching: Check53
Commissioning (Settings in the Actuator)55
Switch Compartment: Open/Close56
Mechanical Position Indicator (Self-Adjusting)56
Mechanical Position Indicator: Set56
Gear Stage of the Reduction Gearing: Test/Set57
Mechanical Position Indication Via Indicator Mark (Not Self-Adjusting)58
Mechanical Position Indicator: Set59
Gear Stage of the Reduction Gearing: Test/Set59
Corrective Action61
Faults During Commissioning61
Fault Indications and Warning Indications61
Fuses65
Fuses Within the Actuator Controls65
Fuse Replacement65
Replace Fuses65
Test/Replace Fuses66
Motor Protection (Thermal Monitoring)66
Servicing and Maintenance68
Preventive Measures for Servicing and Safe Operation68
Maintenance68
Disposal and Recycling68
Technical Data70
Technical Data Part-Turn Actuator70
Technical Data Actuator Controls72
Tightening Torques for Screws77
Spare Parts78
Part-Turn Actuators SQ78
Sq 14.2/Sqr 05.278
AC 01.2 Actuator Controls with S Electrical Connection80
Index84

AUMA SQ Series - AC 01.2 Actuator Controls with S Electrical Connection

Table of Contents

Other manuals for AUMA SQ Series

Related product manuals