auna iTuner 320 BT - FM Operation (Continued); FM Scan and Audio Settings

65
EN
Scan Setting
1. Press the MENU button to access FM menu.
2. Press the
buttons to select Scan setting and then press the
SELECT button to conrm.
3. Press the
⏮/⏭ buttons to select YES to receive Strong stations only and
then press the SELECT button to conrm.
Audio Setting
1. Press the MENU button to access the main menu.
2. Press
buttons to select Audio setting and press the SELECT
button to conrm.
3. Press ⏮/⏭ buttons to select [Yes] to listen in mono only or [NO] to let
the unit select Stereo or Mono automatically.
4. Press the SELECT button to conrm.
Alternatively, press the MONO/ST. button on the remote control to toggle
between the Mono only or Mono/Stereo selection.
Saving and Recalling Preset Station
Refer to "Preset Stations" and "Recalling a Stored Station" under Internet
Radio section for instruction.