auna iTuner 320 BT - System Settings; Equalizer and Network Configuration

51
EN
SYSTEM SETTINGS
Press and hold the MENU/INFO button on the remote control to display
the menu. Turn the SCROLL/SELECT dial on the unit or the
buttons on the remote control to select System settings. Then press the
SCROLL&SELECT dial on the unit or the SELECT button on the remote
control to conrm.
Equalizer
This system supports a variety of equalizers and sound eects.
Press the EQ button to access the Equaliser menu.
Alternatively:
During System settings mode, press the
buttons to select
Equaliser and then press the SELECT button to conrm.
1. The display will show : NORMAL > CLASSIC > ROCK > POP > JAZZ > MY
EQ > MY EQ PROFILE SETUP
2. Press the buttons to select and then press the SELECT
button to conrm.
3. For [MY EQ], please go to [My EQ Prole Setup] for custom setting
before select.
4. During [My EQ Prole Setup], press to select [Bass/Treble]
and then press SELECT button to conrm. Press to select
desired level and then press SELECT button to conrm.
5. Press BACK button to exit and then press
⏮ / ⏭ buttons to select [YES]
and press SELECT button to conrm. The Display will show Equaliser
Saved.
Network
1. During System Settings mode, press the
buttons to select
Network and press the SELECT button to conrm.
2. Press the buttons to select from the following settings, and
then press the SELECT button to conrm.
Network wizard
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual cong – select wireless network with
DHCP enable/disable.
PBC Wlan setup
Select WPS on the unit and press the WPS
button on the modem device that you
wish to connect with. Press SCROLL&SELECT
dial on unit or SELECT button on remote
control to continue.
View settings Display the setting on the unit.