auna iTuner 320 BT - Music Player Operation; USB Playback and Playlists

59
EN
MUSIC PLAYER OPERATION
The built-in Music Player allows you to play unprotected audio les stored
on a connected USB mass storage device via the device. Press MODE
button on unit or remote control to access Mode Menu. Turn the
SCROLL&SELECT dial on unit or press buttons on remote
control to select Music Player mode, then press SCROLL&SELECT dial on
unit or SELECT button on remote control to conrm.
USB Playback
When a USB device is connected to the unit under Music Player mode, the
display shows “USB disk attached – Open folder?”, press SELECT button to
conrm [YES].
Alternatively,
• During Music Player mode, press the
buttons to select USB
playback and press the SELECT button to conrm.
• Press the buttons to select and press SELECT button to
conrm a song le.
The unit may not be compatible with all USB devices; this is not an
indication of a problem with the unit.
Playing Music via Music Player
1. Press
⏯ button on the unit or on the remote control to play/pause music.
2. Press ⏮/⏭ buttons on unit or remote control to skip to the previous/
next track.
My playlist
1. Under menu of Music Player mode, press
buttons to select
My playlist and press the SELECT button to conrm.
2. Press buttons to select songs and press SELECT button to
start playing through the playlist.
Saving songs into My playlist
• To store a song into My playlist, you must rst be listening to the song
that you would like to save.
• Press and hold the SELECT button to save.
Repeat Mode
1. Under menu of Music Player mode, press the
buttons to
select Repeat play and press SELECT button repeatedly to turn repeat
play on/o. A corresponding Repeat symbol appears in the status bar.
2. Alternatively, press REPEAT button on remote control repeatedly to turn
mode on/o.
USB disk attached -
Open folder?
YES
NO
USB playback