auna iTuner 320 BT - System Settings (Continued); Manual Network and Time Settings

52
EN
Manual settings
Select wireless network with DHCP enable/
disable.
NetRemote PIN Setup
To dene a PIN number to be entered before
being able to connect to the unit remotely
over a network.
Network prole View the connected network.
Clear network settings
To delete the connected network memory in
Network prole.
Keep network
connected
Allows you to dene whether the device
remains connected to its network in Standby
mode and when not in Network radio mode.
3. Press the BACK button on the unit or remote control to cancel the setting
and return back to the previous menu.
Time/Date
The Time/Date can be automatically set once it has been connected to the
Internet, DAB or FM radio station with time/date information. You may also
adjust the Time/Date manually.
Press CLOCK button on remote control can access Set Time/Date menu to
adjust Time/Date.
Alternatively: During System settings mode, press
buttons
to select Time/Date and press the SELECT button to conrm. Press
buttons to select Set Time/Date and press the SELECT button
to conrm.
1. The date digits will ash on the display.
2. Press the / buttons to adjust the day and then press the SELECT
button to conrm.
3. Repeat above Step (2) to set the Month/Year/Hour/Minute.
4. The date and time settings are now complete.
For the other settings under Time/Date, press buttons to select
from the following options and then press the SELECT button to conrm.
Auto update DAB / FM / Network / No update.
Set format 12 / 24 hour format.
Set timezone
Select a time zone. (Only available when
Auto update from Network is on.)
Daylight savings
Select daylight savings. (Only available
when Auto update from Network is on.)