auna iTuner 320 BT - System Settings (Continued); Standby, Language, Reset, and Updates

53
EN
The default auto time update setting is “Update from Network”. If you would
like to manually set the time, it is recommended to turn the Auto update
function o.
Inactive Standby
Use the Inactive Standby to turn o the unit after a certain time in play
mode.
1. During System settings mode, press the
buttons to select
Inactive Standby and then press the SELECT button to conrm.
2. The display will show : O > 2 hours > 4 hours > 5 hours > 6 hours
3. Press the buttons to select and then press the SELECT
button to conrm.
Language
1. During System settings mode, press the
buttons to select
Language and then press the SELECT button to conrm.
2. Press the buttons to change the display language of your
choice.
3. Press the SELECT button to conrm.
Factory Reset
There may be times when you need to reset your unit back to the factory
settings especially when you have moved house. If you experience
reception problems you may want to reset and try again.
If you move to another part of the country and pick up the local and national
DAB+ stations in that area, your previously tuned channels may no longer
be available.
1. During System settings mode, press the
buttons to select
“Factory reset”, and press the SELECT button to conrm.
2. Press the buttons to select Yes, and press the SELECT button
to conrm or select No to cancel.
Note: After the system reset, all the tuned stations, Internet, DAB & FM
preset stations will be erased.
Software update
1. During System settings mode, press the
buttons to select
Software update and then press the SELECT button to conrm.
2. Press the buttons to select Auto-check setting or Check now,
and then press the SELECT button to conrm.
Before downloading software, ensure that the radio is plugged into a
stable mains power connection. Interrupting the mains supply during
software download can lead to functional disturbances and/or damage
to the unit!