AURATON 2020 - Manual operation; Energy-saving operation

5. Manual operation
Short pressing the MAN button causes that the
controller ceases execution of the program and
resumes manual operation. The symbol " "
appears on the display.
Required temperature, to be maintained the whole
week through, may be adjusted with the help of the
buttons " ". Automatic operation is resumed
again by pressing AUTO.
ECOMO
MANUAL
MANUAL
MANUAL
6. Energy-saving operation
This mode enables temporary setting of any
temperature for the period up to seven days with
the accuracy of 1 minute. Afterwards, the controller
returns to the automatic operation program. When
we leave home for 3 days, the room temperature
may be reduced but a certain time before our return
the automatic operation should be resumed.
In result, returning home we should not even
remark that the temperature was reduced during
our absence. We could only remark that the energy
expenses are lower.
Example
We intend to leave on Wednesday at 9:31 a.m.,
planning to return on Sunday at about 8:00 p.m.
The energy necessary for heating may be saved
during our absence.
1. Press the MAN button for about 3 seconds,
until two symbols appear together at
the display.
ECOMO
MANUAL
43
EN
AURATON 2020, AURATON 2020 TX Plus - Manual operation