AURATON 2020 User Manual

4. Setting the controller
AURATON 2020
AURATON 2020 TX Plus
4.1 Adjustment of the day of the week
(No 2 at the display)
1. Move the battery cover to the right.
2. Repeat pressing the DAY pushbutton until
proper day of the week appears at the display,
according to the point 2.2.
4.2 Setting the clock
(No 1 at the display)
1. Move the battery cover to the right.
2. Repeat pressing the HOUR pushbutton until
proper hour appears at the display.
3. Repeat pressing the MIN pushbutton until
proper minute appears at the display.
4. Slide the battery cover back to its place. Now
the controller clock indicates proper date and
time.
Note: Longer pressing the DAY, HOUR, or MIN
pushbutton (exceeding 2 seconds) causes
automatic scrolling of the day, hour, or minute
value, respectively.
4.3. Description of the programming function
AURATON 2020 and AURATON 2020 TX RX Plus
remember 8 temperatures that may be adjusted in
the range from 5ºC to 27ºC with the accuracy of
0.5ºC.
The antifreeze temperature is constant and may be
adjusted by the slider (accessible after uncovering
the batteries).
The controller enables adjusting 4 temperature
values for one 24-hours period that will be in force
equally for 5 working days of the week, from
Monday (MO) to Friday (FR). Additionally, the
controller allows to set separately 2 temperatures
for Saturday (SA) and Sunday (SU).
AURATON 2020, AURATON 2020 TX Plus - Setting the controller
38
EN

AURATON 2020 Specifications

General

Display	LCD
Temperature Control Range	5°C to 30°C
Programming	7-day programming
Mounting	Wall-mounted
Compatibility	Compatible with most heating systems
Type	Programmable thermostat
Power Supply	230V AC 50Hz
Hysteresis	±0.2°C
Operating Temperature Range	0°C to 40°C
Communication	Wired