For Sunday (SU):
4.4 Programming at the first start after installing
the batteries
1. Move the battery cover to the right
and the slider move to HEAT.
2. Press the PROG button, the
display will be as follows:
The indicator of the Program 1
blinks, which means that it is to be
set.
3. Repeat pressing the buttons HOUR or MIN (no
later than 10 seconds after PROG) with a view
to adjust the time of setting the temperature.
In order to program the controller efficiently you
should decide what temperatures would be required
at home (in the office) from Monday to Friday, and
on Saturday and Sunday, and at what time should
they change. A simple table, proposed here, would
be helpful for this purpose.
For the period from Monday to Friday:
For Saturday (SO):
program 3
program 4
program 1
program 2
Program No
Hour
Temperature
adjustment
program 1
program 2
program 1
program 2
MO TU WE TH FR
SETPOINT
PROG
1 2
3
4
:
.
0
C
Program No
Hour
Temperature
adjustment
Program No
Hour
Temperature
adjustment
39
EN
AURATON 2020, AURATON 2020 TX Plus - Setting the controller
To Next Page
Loading...
