5. Is the SETPOINT indication displayed, the
temperature indicator ‘7’ shows the
programmed temperature instead of the room
temperature.
6. Low battery indicator reminds the need of
exchanging the batteries for new ones. The
batteries should be then replaced as soon as
possible.
7. Temperature. In normal operation mode the
controller displays temperature of the room
where it is installed.
8. Indicator of operating hours of the heating
device.
9. The indicator of energy-saving operation mode
appears (always together with the manual
control indicator) when the program operation is
temporarily suspended in order to set any
energy-saving temperature level for a
predetermined period of time (from 1 to 7 days,
with one-minute accuracy).
10. The manual control indicator appears when
program operation is cancelled and manually
adjusted temperature is to be maintained
permanently.
AURATON 2020, AURATON 2020 TX Plus - Acquaintance
36
EN
To Next Page
Loading...
Need help?
General
