Issue date: 15.Nov.2016
Page: 2-9
CASTROL Edge Professional A3
Only use above listed engine oils for operation if conformance to MB 229.5 specification is
ensured (e.g. by label on the oil packaging). Austro Engine GmbH will not assume any
liabilities if other sorts of oil are used.
It is not recommended to mix different SAE grades.
Use only one type of approved E4P engine oil for an oil change.
Oil brands which are not approved must not be used.
Oil volume (initial filling)
Oil volume (continuously)
Gearbox oil temperature (start):
Gearbox oil temperature (full load)
SHELL Spirax S6 GXME 75W-80
(former brand name: SHELL Spirax GSX 75W-80)
Refer to MM for proper filling procedure.
2.5.6.2 Coolant
Coolant temperature (start):
Coolant temperature (full load)
It has to be ensured that the freezing point of the coolant is at or below -30 ºC before
operating the engine.
To Next Page
Loading...
Need help?
General
