Austro Engine E4P - Speed

Operation Manual
E4P
E4.01.02
Issue date: 15.Nov.2016
Page: 2-11
Revision no: 1
OPERATION WITH ANTI-ICING FUEL ADDITIVES:
The application of the following additive is allowed for an operated engine:
PRIST Hi-Flash
max. 1500 ppm
“I-M” (acc. to OST 54-3-175-72-99)
max. 3000 ppm
Any mixture of the different types of additives is not permitted.
PRIST Hi-Flash anti-icing fuel additive is only allowed for operation with Jet A, Jet A-1
(ASTM D 1655) and JP-8 (F34).
Anti-icing fuel additive “I-M” is only allowed for operation with TS-1 (Russia and Ukraine)
and RT (Russia and Ukraine).
If operating the engine with above listed anti-icing fuel additives, the specifications of the
manufacturers must be adhered to.
2.5.6.5 Speed
Max. prop. over speed:
2500 rpm
Max. take-off speed:
2300 rpm
Max. continuous speed:
2200 rpm
2.5.6.6 Voltage
min.
20,5 V
max.
32,2 V
2.5.6.7 Performance
Certified Altitude
max.
20.000 ft
Intentional negative g operation is not allowed.