1 Identification
1.1 Type Designation
TC-Designation: E4
Model: E4P (Sales Name AE330)
For detailed information about available configurations refer to latest revision of Austro Engine Service
Bulletin MSB E4-002.
If not otherwise stated this manual is applicable to all available configurations.
1.2 Engine Identification
Relevant data for engine identification including the serial number is stated on an engine identification
plate, which is fixed onto the crankcase beneath the starter. For further questions contact Austro
Engine GmbH.
Fig. 1.1: Engine Identification plate
To Next Page
Loading...
Need help?
General
